Land Rover Discovery: Airbag and Safety Belt Pretensioner Supplemental Restraint System
READ NEXT:
PRINCIPLES OF OPERATION
For a detailed description of the Supplemental Restraint System, refer to
the relevant Description and Operation section in the workshop manual.
REFER to: Airbag Supplemental
NOTE:
NAS vehicles have a seat position sensor fitted to both the driver and
passenger-side seats.
The seat position sensor, a hall-effect sensor, is fitted to the underside of
both the driver and pas
REMOVAL
WARNINGS:
To avoid accidental deployment and possible personal injury,
the
backup power supply must be depleted before repairing or
replacing any air bag supplemental restraint system (S
SEE MORE:
GENERAL EQUIPMENT
REMOVAL
NOTES:
This procedure contains some variation in the illustrations
depending on the vehicle specification, but the essential
information is always correct.
This procedure contains illustrations showing certain components
removed to provide extra clarity.
Raise and
Removal
CAUTIONS:
Make sure to protect the paintwork.
Make sure that all openings are sealed. Use new blanking caps.
Refer to: High Mounted Stoplamp (417-01, Removal and
Installation).
CAUTION:
Do not use tools during this operation, removal of the
component(s) must be carried out by hand.