Land Rover Discovery: Warning lamps
Land Rover Discovery (2009–2016) Owner's Manual / Warning lamps
READ NEXT:
Warning lamps and indicators
Do not ignore warning lamps or
indicators. Take appropriate
action as soon as possible. Failure
to do so may result in death or
serious injury, or serious damage
to the vehicle.
RED warning lamps are
General warning/ information message (amber)
Illuminates when a non-critical
warning message or an
information message is available
in the Message centre.
GLOW PLUGS (AMBER)
Illuminates when the ignition is
switched on, to indicate that the
glow
SEE MORE:
Side Panel Sheet
Metal Repairs 'A'
Pillar
Reinforcement (G1770903) - Installation
Dress the flanges where necessary.
Clean and prepare the panel surfaces.
Using the old A-pillar reinforcement as a guide, detach the new Apillar
reinforcement from the ring frame as indicated.
Separate the joints and remove the A-Pillar reinforcement from the
ring frame.
Cut slots in
Exhaust - Ingenium i4 2.0l Diesel Catalytic Converter to Turbocharger Clamp
(G1964846)/ Removal and Installation
REMOVAL
Remove the engine cover.
Refer to: Engine Cover - INGENIUM I4 2.0L Diesel (501-05 Interior
Trim and Ornamentation, Removal and Installation).
Remove the heat shield.
Torque: 10 Nm
Using suitable cutting/grinding equipment remove the clamp weld
at the points illustrated
Remove the
© 2019-2026 Copyright www.lrdisc.com
