Land Rover Discovery: Vehicle recovery
READ NEXT:
The method for recovery/transportation
of the vehicle is on a transporter or trailer
designed for that purpose.
Make sure that vehicle recovery/
transportation is carried out by
suitably qualified
The towing eye at the rear of the
vehicle is designed for on-road
recovery only. If they are used for
any other purpose, it may result
in vehicle damage and serious
injury.
Use extreme caution
SEE MORE:
Installation
Dress the flanges where necessary.
Mark out the position on the new A-pillar outer panel where the
upper and lower Metal Inert Gas (MIG) welded butt joints are to be
made. Cut through the new panel as indicated.
Offer up the new A-pillar outer panel and clamp into position.
The rain/light sensor is located at the upper edge of the windshield, behind
the interior rear view mirror trim panel. Contact between the rain sensor
and windscreen is provided via a silicon pad which is compressed during the
assembly process by two locking retaining clips either side of the sens