Land Rover Discovery: Front Row Seat
Cushion Cover -
Vehicles with- power Seats (G1780407)
READ NEXT:
Removal
NOTES:
Some variation in the illustrations may occur, but the essential
information is always correct.
Removal steps in this procedure may contain installation details.
Refer to: Front Se
Installation
NOTES:
Make sure that new hog rings are installed.
Use hog ring pliers to close the hog rings. Do not use any
other tool. The hog rings must be closed to overlap as
illustrated.
N
REMOVAL
NOTES:
Some variation in the illustrations may occur, but the essential
information is always correct.
Removal steps in this procedure may contain installation details.
Refer to: Front Ro
SEE MORE:
COMPONENT LOCATION - VEHICLES WITH ACTIVE DRIVELINE
NOTE:
Automatic transmission shown, manual transmission similar
Power Transfer Unit (PTU)
Driveshaft
Rear Drive Unit (RDU)
Hydraulic lines
OVERVIEW
Vehicles with Active Driveline connect to the transmission in the same way
as vehicles witho
Installation
Dress the flanges where necessary.
Offer up the new rear lamp panel outer and clamp into position.
Check alignment, if correct, proceed to next step, if not, rectify and
recheck before proceeding.
Drill holes in the rear lamp panel outer where the metal insert gas
(MIG) plug