Land Rover Discovery Owners & Service Manuals

Land Rover Discovery: General settings

The GENERAL SETTINGS menu screen is divided into categories. Touch to display the list of settings for the required system:

  • System
  • Display
  • Media
  • Bluetooth
  • Phone
  • Navigation
  • Climate

Note: The list will vary, depending on the specification of the vehicle.


The SYSTEM SETTINGS screen is divided into categories and is selected via the GENERAL SETTINGS menu:

  • Language: Select the language required.
  • Time & Date: Select to change the time and date.
  • Volume settings.
  • Unit of measurement: Miles or Kilometres.
  • Automatic show InControl: Automatically launches InControl apps when a smartphone is plugged into the USB port.
  • Beep: Switch on/off.
  • Animations: Switch on/off.
  • Automatic text scrolling: Switch on/off.
  • Screensaver: Switch on/off.
  • Dynamic Home Menu: Switch on/off.
  • Delete all personal data.

Note: The list will vary, depending on the specification of the vehicle.


Valet mode allows the vehicle to be driven and locked by a parking attendant, without giving access to the loadspace.

Valet mode also prevents operation of the Touch screen, to prevent access to telephone numbers or navigation addresses.

Each time Valet mode is used, a Personal Identification Number (PIN) must be entered.

  1. Touch Valet mode in EXTRA FEATURES.
  2. Enter a memorable 4-digit PIN. You will be prompted to confirm the PIN.

    If you wish to cancel the PIN, select Delete. If the PIN is cancelled, or incorrectly entered, you will be prompted to enter the PIN again.

  3. Valet mode activated is displayed to indicate that the PIN has been accepted.

The loadspace is now securely locked in Valet mode and the Valet mode On screen is displayed.


  1. When you re-enter the vehicle, select Valet mode in EXTRA FEATURES.
  2. Enter your memorable 4-digit PIN and touch the OK soft key.

Valet mode deactivated is displayed to indicate that the PIN has been accepted.

  • The loadspace will return to the previously set security requirement.
  • The Touch screen will be enabled.

Note: If the PIN is forgotten, Valet mode can only be deactivated by a Retailer/ Authorised Repairer.


Touch the required extra feature to display that feature's information or settings screen:

  • Timed climate
  • Cameras
  • ECO Data: The ECO Data system is designed to help the driver maximise fuel economy by providing on-screen vehicle data. Touch to select the ECO Data home screen.
  • Valet
  • Ambient lighting: When selected, the ambient lighting in the vehicle can be changed.
  • Wi-Fi hotspot
  • Screen off: Touch to switch the screen off.

Note: The number of extra features will vary, depending on the specification of the vehicle.


     Heating and ventilation

     Manual climate control

    Note: When Eco program is selected, heating and ventilation settings are automatically adjusted to reduce energy consumption. Temperature control: Rotate to adjust. Air distribution: Rotate to di

     Automatic climate control

    Note: The Climate control system removes moisture from the air and deposits the excess water beneath the vehicle. Puddles may form, but this is normal and is no cause for concern. Note: The LED indi


     Rear Drive Halfshafts Rear Right Halfshaft (G1791655) - Installation

    Installation NOTE: This step is only required if previously removed. On vehicles without active driveline: Refer to: Rear Halfshaft Seal (205-02A Rear Drive Axle/Differential - Vehicles Without: Active Driveline, Removal and Installation). On vehicles with active driveline: Refer to: Rear Hal

     Side Panel Sheet Metal Repairs 'A' Pillar Outer Panel (G1770902) - Removal

    NOTE: The A-pillar outer panel is installed in conjunction with: Front bumper cover Hood Front fender Fender splash shield Front door Instrument panel Windshield glass Headliner Side air curtain module Front scuff plate trim panel A-pillar trim panel Front seat The A-pillar outer p

    © 2019-2024 Copyright