Land Rover Discovery: Supplemental Restraint System
/ Description and Operation
READ NEXT:
Component location
NOTE:
Right Hand Drive (RHD) installation shown, Left Hand Drive (LHD)
installation similar
Location 1 of 2
Engine Control Module (ECM)
Battery
Battery Junction Box (BJB)
Ste
There are two types of occupant monitoring:
In all markets except North American Specification (NAS), vehicles have
an occupant detection sensor.
In NAS markets, vehicles have an occupant classifi
Passenger airbag deactivation warning indicator
The Passenger Airbag Deactivation (PAD) warning indicator is installed in
the front overhead console. When appropriate, the indicator illuminates t
SEE MORE:
Installation
Dress the flanges where necessary
Using the old B-pillar outer panel for reference measure, mark and
cut the new B-pillar outer panel where the Metal Inert Gas (MIG)
welded butt joints are to be made as indicated.
Offer up the new B-pillar outer panel and clamp into position.
NOTES:
Make sure that the vehicle battery is fully charged before carrying
out this procedure.
After the battery has been disconnected or a new window regulator
and motor or door module has been installed, it is necessary to
initialize each door window motor separately to operate the onetouch