Land Rover Discovery: Battery Diagnostics
READ NEXT:
PRINCIPLES OF OPERATION
For a detailed description of the battery system and operation, refer to the
relevant Description and Operation section of the workshop manual REFER
to: Battery and Cables (414
PRINCIPLES OF OPERATION
For a detailed description of the battery system and operation, refer to the
relevant Description and Operation section of the workshop manual REFER
to: Battery and Cables (414
PRINCIPLES OF OPERATION
For a detailed description of the battery system and operation, refer to the
relevant Description and Operation section of the workshop manual REFER
to: Battery and Cables (414
SEE MORE:
The stop/start switch is located in the Instrument Panel (IP) and is
hardwired
to the Central Junction Box (CJB). When the switch is pressed two signal
lines from the CJB are connected to ground.
AUTO STOP/START WARNING INDICATOR
The auto stop/start warning indicator is located in the Instrumen
Installation
NOTE:
Make sure that the drilled out spot welds are installed with metal
inert gas (MIG) plug welds in the same quantities.
Using the old suspension top mount for reference prepare the new
suspension top mount in the areas where it is not fully welded and
install the spot welds.
CA