Land Rover Discovery Owners & Service Manuals

Land Rover Discovery: Instrument Cluster

READ NEXT:

 Instrument Cluster Lens (G1791763) / Removal and Installation

REMOVAL CAUTION: Use a suitable trim tool. NOTE: Some variation in the illustrations may occur, but the essential information is always correct. Disconnect the battery ground cable. Refer to: Specifi

 Instrument Cluster (G1791762) Removal and Installation

REMOVAL CAUTION: Use a suitable trim tool NOTES: When a new instrument cluster is to be installed, the Land Rover approved diagnostic system must be connected to the vehicle and the instrument clu

 Instrument Cluster / Description and Operation

COMPONENT LOCATION Head Up Display (HUD) Control Module HUD Cooling Fan Motor Head Up Display Cooling Fan Control Module (HUDCFCM) Instrument Cluster (IC) OVERVIEW INSTRUMENT CLUSTER The Instr

SEE MORE:

 Exhaust - Ingenium i4 2.0l Diesel Diesel Particulate Filter - Vehicles With- Diesel Exhaust Fluid (G1880492) / Removal Installation

REMOVAL WARNING: Observe due care when working near a hot exhaust system. NOTE: Removal steps in this procedure may contain installation details. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. Torque: 55 Nm Torque: 48 Nm CAUTIONS: Make sure that all

 Rear Drive Axle- Differential - Vehicles without- Active Driveline Drive Pinion Flange - Vehicles with- 9HP48 9-speed Automatic Transmission - AWD (G1775379) / Installation

Installation WARNING: Make sure that a new nut is installed. Special Tool(s): 205-053 Torque: 150 Nm CAUTION: The component must be aligned with the installation markings. Make sure new Driveshaft bolts are installed. Torque: 40 Nm Torque: 25 Nm Check and top-up the active on-demand couplin

© 2019-2026 Copyright www.lrdisc.com