Land Rover Discovery: Instrument and Warning Systems
Land Rover Discovery (2009–2016) Service Manual / Electrical / Instrument and Warning Systems
- Horn (G1774485) / Removal and Installation
- Information and Message Center Head up Display Control
- Information and Message Center
- Instrument Cluster
- Parking Aid
- Parking Aid / Diagnosis and Testing
- Parking Aid Proximity Camera / Diagnosis and Testing
- Warning Devices
READ NEXT:
Horn (G1774485) / Removal and Installation
REMOVAL
NOTE:
Removal steps in this procedure may contain installation details.
Torque: 10 Nm
INSTALLATION
To install, reverse the removal procedure.
Horn specifications
Torque Specifications
Information and Message Center Head up Display Control
Information and message center head up display control module (G1780342)
removal and installation
REMOVAL
NOTE:
Removal steps in this procedure may contain installation details.
Disconnect the batt
SEE MORE:
Headlamp removal
Moving the left headlamp unit to access
the bulbs:
Remove the 2 plastic fixings.
Pull the tube up, to release it from the
air box. This will allow more room for
manoeuvrability.
Remove the 4 grille fixings.
Remove the 2 retaining bolts.
The headlamp unit can be withdrawn by
45 mm.
Moving
Engine - Ingenium i4 2.0l Diesel Flexplate (G1875884) / Removal and
Installation
SPECIAL TOOL(S)
PART(S)
REMOVAL
CAUTION:
Under no circumstances should the flexplate retaining bolts be
inserted into the crankshaft with the flexplate removed. Failure to
follow this instruction will result in damage to the engine.
NOTE:
Some variation in the illustrations may occur, but the
© 2019-2025 Copyright www.lrdisc.com
