Land Rover Discovery: Engine - Ingenium i4 2.0l Diesel Upper Timing Chain (G1875889)
READ NEXT:
SPECIAL TOOL(S)
PART(S)
REMOVAL
NOTE:
Removal steps in this procedure may contain installation details.
Disconnect the battery ground cable.
Refer to: Specifications (414-01 Battery, Mounting
Installation
Install the timing chain.
CAUTIONS:
Make sure the highlighted links on the timing chain are in
line with the timing marks as illustrated.
Make sure the camshaft pin is loca
REMOVAL
NOTES:
Some variation in the illustrations may occur, but the essential
information is always correct.
Some components shown removed for clarity.
Removal steps in this procedure may conta
SEE MORE:
REMOVAL
Disconnect the battery ground cable.
Refer to: Specifications (414-01 Battery, Mounting and Cables,
Specifications).
WARNING:
Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
Refer to: Clutch Disc and Pressure Plate - INGENIUM I4 2.0L Diesel,
Vehicles With:
At the back of the headlamp unit,
rotate the appropriate bulb cover
counter-clockwise and then lightly pull
to remove it.
Remove the low beam bulb holder
from the headlamp.
Unclip the low beam bulb and remove
it from the bulb holder.
Rotate the DRL/high beam bulb unit
counter-clockwise.