Land Rover Discovery Owners & Service Manuals

Land Rover Discovery: Fuel Charging and Controls - Ingenium i4 2.0l Diesel Fuel Injector Fuel Return Line (G1875962)

Land Rover Discovery (2009–2016) Service Manual / Powertrain / Engine / Fuel Charging and Controls - Ingenium i4 2.0l Diesel Fuel Injector Fuel Return Line (G1875962)

READ NEXT:

 Fuel Charging and Controls - Ingenium i4 2.0l Diesel Fuel Injector Fuel Return Line (G1875962) / Removal

Removal WARNING: Be prepared to collect escaping fuel. NOTES: Some illustrations may show the engine removed for clarity. Some variation in the illustrations may occur, but the essential informati

 Fuel Charging and Controls - Ingenium i4 2.0l Diesel Fuel Injector Fuel Return Line (G1875962) / Installation

Install the fuel injector fuel return line. NOTE: Remove and discard the blanking cap. Connect the fuel pump fuel return line. NOTE: Remove and discard the blanking caps. Connect the fuel ra

 Fuel Charging and Controls - Ingenium i4 2.0l Diesel Fuel Injectors (G1875958) / Removal and Installation

SPECIAL TOOL(S) PART(S) REMOVAL WARNINGS: Place the vehicle in a well ventilated, quarantined area and arrange ' No Smoking/Petrol Fumes' signs about the vehicle. Avoid flames, sparks or li

SEE MORE:

 General Installation Instructions

COMPONENT REMOVAL Whenever possible, clean components and the surrounding area before removal. Blank off openings exposed by component removal. Following disconnection, seal fuel, oil or hydraulic lines immediately using suitable blanking plugs or caps. Seal open ends of exposed oilways using

 Liftgate Latch (G1794531) / Removal and Installation

REMOVAL NOTE: Removal steps in this procedure may contain installation details. Refer to: Liftgate Trim Panel (501-05, Removal and Installation). Torque: 11 Nm INSTALLATION To install, reverse the removal procedure.

© 2019-2024 Copyright www.lrdisc.com