Land Rover Discovery Owners & Service Manuals

Land Rover Discovery: Handles, Locks, Latches and Entry Systems / Description and Operation

Land Rover Discovery (2009–2016) Service Manual / Body / Handles, Locks, Latches and Entry Systems / Handles, Locks, Latches and Entry Systems / Description and Operation

READ NEXT:

 Handles, Locks, Latches and Entry Systems - Component Location

COMPONENT LOCATION - LOCKS AND LATCHES Left hood latch (including microswitch) Hood safety latch Right hood latch Right front interior door handle Right front exterior door handle Right front

 Handles, Locks, Latches and Entry Systems - Description

DOOR LATCHES NOTE: Driver door shown, other door latches similar Emergency key cover - driver door only Emergency key Emergency key barrel Exterior door handle assembly Interior door handle as

 Hood Latch

Right striker Right hood latch Hood safety latch Hood safety latch guide Left striker Left hood latch Hood switch Hood release lever The hood is secured in the closed position by two latche

SEE MORE:

 Rear end Sheet Metal Repairs Back Panel Inner (G1770945) - Installation

Installation Dress the flanges where necessary. Offer up the new back panel inner panel and clamp into position. Check alignment, if correct, proceed to next step, if not, rectify and recheck before proceeding. Drill holes where the metal inert gas (MIG) plug welds are to be installed as

 Fuel Pump Driver Module

The fuel pump operation is regulated by the FPDM which is controlled by the Powertrain Control Module (PCM). The FPDM regulates the flow and pressure supplied by controlling the operation of the Low Pressure (LP) fuel pump using a Pulse Width Modulation (PWM) output. The FPDM is powered by a supp

© 2019-2024 Copyright www.lrdisc.com