Land Rover Discovery: Front Row Seat Backrest Cover - Vehicles with- power Seats (G1780396) / Removal and Installation

REMOVAL

WARNINGS:

• To avoid accidental deployment, the restraints control module backup power supply must be depleted. Wait at least two minutes after disconnecting the battery ground cable(s) before commencing any repair or adjustment to the supplemental restraint system (SRS), or any component(s) adjacent to the SRS sensors. Failure to follow these instructions may result in personal injury.
• Always wear safety glasses when working on an air bag equipped vehicle and when handling an air bag module. Failure to follow this instruction may result in personal injury.
• To minimize the possibility of injury in the event of premature deployment, always carry a live air bag module with the bag and trim cover pointed away from the body. Failure to follow this instruction may result in personal injury.
• To minimize the possibility of premature deployment, do not use radio key code savers when working on the supplemental restraint system. Failure to follow this instruction may result in personal injury.
• To minimize the possibility of premature deployment, live air bag modules must only be placed on work benches which have been ground bonded and with the trim cover facing up. Failure to follow these instructions may result in personal injury.
• Never probe the electrical connectors of air bag modules or any other supplemental restraint system component. Failure to follow this instruction may result in personal injury.
• Painting over the driver air bag module trim cover or instrument panel could lead to deterioration of the trim cover and air bags. Do not for any reason attempt to paint discolored or damaged air bag module trim covers or instrument panel. Install a new component.

  Failure to follow this instruction may result in personal injury.

NOTES:

• Some variation in the illustrations may occur, but the essential information is always correct.
• Removal steps in this procedure may contain installation details.

All vehicles

Refer to: Front Row Seat - Vehicles With: Power Seats (501-10 Seating, Removal and Installation).

NOTE:

Left illustration shown, right is similar.

Vehicles without power seats

CAUTION:

A new component must be installed.

CAUTION:

Take extra care not to damage the clips.

Vehicles with power seats

NOTE:

Left illustration shown, right is similar.

All vehicles

WARNINGS:

• Do not probe supplemental restraint system (SRS) electrical connectors.
• The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.

NOTE:

Left illustration shown, right is similar.

Torque: 9 Nm

WARNING:

Make sure that the air bag is correctly installed in to the fabric chute. Failure to follow this instruction may result in incorrect operation of the air bag.

CAUTION:

Note the installed position of the component(s) prior to removal.

INSTALLATION

NOTES:

• Make sure that new hog rings are installed.
• Use hog ring pliers to close the hog rings. Do not use any other tool. The hog rings must be closed to overlap as illustrated.

To install, reverse the removal procedure.

Front row seat backrest cushion - vehicles with- power seats (G1780400) removal and installation

REMOVAL

NOTES:

• Some variation in the illustrations may occur, but the essential information is always correct.
• Removal steps in this procedure may contain installation details.

Refer to: Front Seat Backrest Cover - Vehicles With: Power Seats (501-10, Removal and Installation).

INSTALLATION

To install, reverse the removal procedure.

Front Row Seat Backrest Blower (G1780403) / Removal and InstallationFront Row Seat Control Switchpack (G1780397) / Removal and Installation

READ NEXT: