Land Rover Discovery: Side Panel Sheet Metal Repairs Rocker Panel and B Pillar Inner (G1770926)
Land Rover Discovery (2009–2016) Service Manual / Body / Body Repairs and General
Information / Side Panel Sheet
Metal Repairs
Rocker Panel and B
Pillar Inner (G1770926)
- Side Panel Sheet Metal Repairs Rocker Panel and B Pillar Inner (G1770926) - Removal
- Side Panel Sheet Metal Repairs Rocker Panel and B Pillar Inner (G1770926) - Installation
Side Panel Sheet
Metal Repairs
Rocker Panel and 'B'
Pillar Outer
Panel (G1770927) -
InstallationSide Panel Sheet
Metal Repairs
Rocker Panel and B
Pillar Inner (G1770926) - Removal
READ NEXT:
Side Panel Sheet
Metal Repairs
Rocker Panel and B
Pillar Inner (G1770926) - Removal
NOTE:
The rocker panel and B-pillar inner is installed in conjunction with:
Front fender
Front door
Rear door
B-pillar outer panel
Headliner
Rocker panel
NOTE:
The rocker panel and B-pillar in
Side Panel Sheet
Metal Repairs
Rocker Panel and B
Pillar Inner (G1770926) - Installation
Installation
Dress the flanges where necessary.
Detach the rocker panel and B-pillar inner joints from the new ring
frame as indicated.
Separate the joints and remove the rocker panel
SEE MORE:
Hands Free Tailgate
Sensor (G1890141) / Removal and
Installation
REMOVAL
NOTE:
Removal steps in this procedure may contain installation details.
WARNING:
Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and
Installation).
Torque: 10 Nm
CAUTION:
Take extra care not to damage
Gradient release control (GRC)
With Hill Descent Control (HDC) activated,
if the vehicle is stopped on a slope using
the brake pedal, GRC will become active
(except in the Terrain response system's
Sand program). During a hill ascent, when
the brake pedal is released, GRC will
automatically delay and graduate the
brake release, t
© 2019-2026 Copyright www.lrdisc.com
