Land Rover Discovery: Interior Trim and Ornamentation
Land Rover Discovery (2009–2016) Service Manual / Body / Interior Trim and Ornamentation
- Interior Trim and Ornamentation 'A' Pillar Trim Panel (G1785128) / Removal and Installation
- Interior Trim and Ornamentation 'B' Pillar Upper Trim Panel (G1785129) / Removal and Installation
- Interior Trim and Ornamentation 'C' Pillar Upper Trim Panel (G1785132) / Removal and Installation
- Interior Trim and Ornamentation 'D' Pillar Trim Panel (G1785133) / Removal and Installation
- Interior Trim and Ornamentation Front Door Trim Panel (G1785135) / Removal and Installation
- Interior Trim and Ornamentation Headliner (G1785136) / Removal and Installation
- Interior Trim and Ornamentation Liftgate Trim Panel (G1785262) / Removal and Installation
- Interior Trim and Ornamentation Loadspace Trim Panel (G1785138) / Removal and Installation
- Interior Trim and Ornamentation Rear Door Trim Panel (G1785134) / Removal and Installation
Rear Door Latch (G1791774)
/ Removal and
InstallationInterior Trim and Ornamentation 'A'
Pillar Trim
Panel (G1785128) / Removal and
Installation
READ NEXT:
Interior Trim and Ornamentation 'A'
Pillar Trim
Panel (G1785128) / Removal and
Installation
REMOVAL
CAUTIONS:
LH illustration shown, RH is similar.
Do not use tools during this operation, removal of the
component(s) must be carried out by hand.
NOTE:
Removal steps in this procedure may
Interior Trim and Ornamentation 'B'
Pillar Upper
Trim Panel (G1785129)
/ Removal and Installation
PART(S)
REMOVAL
CAUTION:
Do not use tools during this operation, removal of the component(s)
must be carried out by hand.
NOTES:
Removal steps in this procedure may contain installation details.
R
Interior Trim and Ornamentation 'C'
Pillar Upper
Trim Panel (G1785132)
/ Removal and Installation
REMOVAL
CAUTION:
Do not use tools during this operation, removal of the component(s)
must be carried out by hand.
NOTES:
Removal steps in this procedure may contain installation details.
RH illustr
SEE MORE:
Rear Drive Unit
(RDU)/ Operation
The RDU is driven by the driveshaft which is connected to the PTU. As the
PTU synchroniser is engaged, the driveshaft begins to rotate the stationary
components within the RDU. Pressure is then applied to the clutch plates
and torque is the transferred to the halfshafts.
The drive flange is connect
Front end Body Panels
Hood (G1780780) /Removal and
Installation
REMOVAL
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
The hood is manufactured from aluminium.
Make the SRS system safe.
Refer to: Standard Workshop Practices (100-00 General
Information, Description and Operation).
Refer to: Health and Safety Precautions (100-00 G
© 2019-2026 Copyright www.lrdisc.com
